The AA121CK01 is a 12.1-inch TFT-LCD module designed for industrial display use. It integrates the LCD panel, driver circuits, and backlighting system, providing a complete display solution for integration into machine control panels and embedded systems.

Expected / Typical Features (confirm with datasheet):

• Panel size: 12.1 inches

• Resolution: e.g. XGA (1024 × 768) or SXGA (1280 × 1024)

• Interface: LVDS, TTL, or RGB

• Backlight: LED or CCFL

• Operating temperature: industrial range (e.g. –20 °C to +70 °C)

• Mechanical size: outer dimensions, mounting hole layout, panel thickness

• Brightness / contrast ratio, viewing angles

• Power requirements: logic voltage, backlight voltage/current

Applications:

• Industrial HMI (Human-Machine Interfaces)

• Control panels in automation equipment

• Embedded display solutions for machines

• Instrumentation & test systems

• Panel PCs or operator consoles

The post AA121CK01 12.1″ TFT-LCD Module | Industrial Display Panel appeared first on www.overwin.co.th.

The Mitsubishi AA104SH02 is a 10.4-inch a-Si TFT-LCD module composed of the LCD panel, driver ICs, control circuits, and LED backlighting system. Beyondinfinite.com+2file01.andesource.com+2

This module supports SVGA resolution (800 × 600 RGB) and uses an LVDS (Low Voltage Differential Signaling) interface for data. Mouser Electronics+1 Its operating temperature range is from about –30 °C to +80 °C. agdisplays.com+1

The backlight is LED based (white LED) and is typically driven by a built-in or companion LED driver circuit. store.lcdparts.net+2agdisplays.com+2

Mechanically, the module’s overall dimensions are approximately 230.0 mm × 180.2 mm × 10.5 mm with an active area of 211.2 mm × 158.4 mm. store.lcdparts.net+2elecok.com+2

Key Features & Benefits

• Clear SVGA resolution (800 × 600) with good color reproduction

• LVDS interface ensures good signal integrity over cable

• Industrial temperature tolerance (–30 to +80 °C)

• LED backlight for brightness and long life

• Solid mechanical design for HMI, instrumentation, control panels

Typical Applications

• Operator panels / HMIs in factory automation

• Industrial control consoles

• Embedded systems needing a color display

• Test & measurement devices

• Medical or instrumentation displays

The post Mitsubishi AA104SH02 10.4″ SVGA TFT LCD Module appeared first on www.overwin.co.th.

The Mitsubishi AA065VB01 is a 6.5-inch color TFT-LCD module that integrates an LCD panel, driver ICs, control circuitry, and backlight unit. Beyondinfinite.com+1

It supports a 640 × 480 (VGA) resolution with 262K colors (6-bit RGB). Beyondinfinite.com The module is typically powered by 3.3 V or 5.0 V logic for the LCD side. Beyondinfinite.com The backlight is provided by dual CCFL tubes (edge-lit) and requires its own inverter drive. Beyondinfinite.com

Mechanically, the module size is about 154.0 mm × 121.0 mm × 11.0 mm, with an active display area of 132.48 × 99.36 mm. Beyondinfinite.com

Key Features & Benefits

• TFT display with 262K colors, VGA resolution (640 × 480) Beyondinfinite.com

• CMOS / TTL digital interface for display data Beyondinfinite.com

• Good viewing angles (±70° horizontal, ±60° vertical typical) Beyondinfinite.com

• Anti-glare and hard coated front surface (3H) Beyondinfinite.com

• Backlight via dual CCFL lamps, ~50,000 h lifetime typical Beyondinfinite.com

• Compact and relatively thin module form factor

• Suitable for industrial control panels, HMI units, and embedded display applications

Typical Applications

• Industrial human-machine interface (HMI) equipment

• Control panels and operator consoles

• Embedded systems requiring color display

• Test & measurement instrumentation

• Factory automation display modules

The post Mitsubishi AA065VB01 6.5″ TFT-LCD Module (640×480 VGA) appeared first on www.overwin.co.th.

The Fanuc A90L-0001-0537/R is a dedicated spindle motor cooling fan designed for use in CNC machines and automation systems to maintain safe operating temperatures in spindle motors. It provides forced air cooling directly on rotating spindles or their housing, thereby improving reliability, reducing heat stress, and prolonging motor life.

Manufactured to OEM tolerances and compatible with Fanuc spindle assemblies, this fan is often specified to run on AC 200 V (3-phase) with a power rating around 30–32 W. CPU Medics It replaces or matches models such as A90L-0001-0537#RM2 in many spindle setups. avtechmachine.net

Features & Benefits

• OEM Fanuc spindle fan for reliable integration

• AC 200V, 3-phase operation

• ~30–32 W power rating CPU Medics

• Designed for continuous operation in harsh industrial environments

• Helps maintain safe spindle temperatures and prevents overheating

• Direct replacement for standard Fanuc spindle cooling fans

Typical Applications

• Cooling for CNC spindle motors

• Thermal management in machine tool spindles

• Retrofit or replacement fan for Fanuc spindle systems

• Use in precision machining centers where spindle overheating is a concern

The post Fanuc A90L-0001-0537/R Spindle Motor Cooling Fan appeared first on www.overwin.co.th.

The FANUC A66L-2050-0031 is an OEM ribbon/data cable used in FANUC CNC and automation systems. It enables data communication between control boards, interface cards, and modules. This cable is commonly used as a connecting line or ribbon cable in FANUC drives, controllers, HMIs, and interface boards. Eisen Machinery Inc+2Alibaba+2

Features & Benefits:

• Genuine or equivalent FANUC cable designed for compatibility

• Robust construction for industrial environments

• Flexible ribbon / flat cable format for compact routing

• Reliable signal integrity for control and data lines

• Long service life and high resistance to vibration

Typical Applications:

• Interconnecting boards in FANUC CNC systems

• Linking control modules and interface units

• Repair and replacement for FANUC controllers or I/O modules

• Automation panels requiring internal data wiring

The post FANUC A66L-2050-0031 Ribbon / Data Cable appeared first on www.overwin.co.th.

The 955565 3.7V lithium polymer battery is a rechargeable Li-Po cell designed for portable electronics, smart devices, and embedded systems. Offering high capacity (typically 3500–4500mAh) in a slim, lightweight form, this battery provides stable voltage output and long cycle life.

The model code 955565 represents the battery’s approximate dimensions — 9.5 mm thickness × 55 mm width × 65 mm length, making it ideal for compact product designs. It’s built with high-quality lithium polymer chemistry, featuring integrated protection circuitry (PCM) to prevent overcharge, over-discharge, and short-circuit damage.

Specifications:

• Model: 955565

• Nominal Voltage: 3.7 VDC

• Capacity: 4000 mAh (typical, varies by manufacturer 3500–4500 mAh)

• Battery Type: Lithium Polymer (Li-Po)

• Dimensions: 9.5 × 55 × 65 mm (approx.)

• Charging Voltage: 4.2 V (max)

• Discharge Cut-off: 3.0 V (recommended)

• Protection Circuit: Optional (PCM/BMS available)

• Connector: JST or customized leads (varies by model)

• Cycle Life: ≥ 500 charge/discharge cycles

• Operating Temperature: –20 °C ~ +60 °C

Applications:

• IoT and sensor modules

• Portable handheld devices

• Bluetooth speakers and audio systems

• GPS trackers and data loggers

• Smart home and wearable products

• Medical and test instruments

Benefits:

• High energy density in compact form

• Long cycle life and stable discharge curve

• Built-in safety protection (optional PCM)

• Lightweight design with flexible mounting options

• Ideal for low-to-medium power electronics

The post 955565 3.7V 4000mAh Lithium Polymer Battery appeared first on www.overwin.co.th.

The 13168Z/98 2000W quartz infrared halogen lamp is a reflector-type IR heater lamp ideal for industrial processes requiring precise, high-intensity heat. With a tungsten filament enclosed in a quartz tube and a white reflector backing, this lamp provides efficient directional infrared emission.

Typical specifications include:

• Power: 2000 W

• Operating Voltage: ~ 235 V (or variant)

• Bulb Type: T3 quartz tube with white reflector

• Base / Connection: SK15 with lead wires / fork terminals

• Overall Length (MOL): ~ 353 mm (or ~ 14″)

• Rated Life: ~ 5000 hours typical

• Emission: Short-wave / medium-wave IR radiation for fast heating response

Applications:

• Plastic blow molding and PET bottle heating

• Drying and curing of coatings, inks, adhesives

• Infrared heating in tunnel ovens

• Preheating, forming, laminating in industrial processes

Benefits:

• Rapid, targeted heating with low thermal lag

• Durable quartz construction for high-temperature environments

• Reflector design enhances directional heat output

• Long life and stable performance under continuous use

The post 13168Z/98 2000W Quartz Infrared Halogen Heating Lamp appeared first on www.overwin.co.th.

The NTN 7908CG/GNP4 is a single-row angular contact ball bearing from NTN’s Precision Bearing (GNP4) Series, specifically designed for high-speed and high-accuracy applications such as CNC spindles, robotics, and precision machinery.

Built with ceramic balls (CG type) and super-finished steel rings, this bearing provides exceptional rotational accuracy, low heat generation, and extended service life even under demanding speed and load conditions. The GNP4 precision rating (ABEC-7 equivalent) ensures tight dimensional tolerances and smooth operation, essential for machine tool performance.

Specifications:

• Brand: NTN

• Model: 7908CG/GNP4

• Type: Angular Contact Ball Bearing

• Precision Class: GNP4 (ISO Class P4 / ABEC-7)

• Contact Angle: 15° (typical for high-speed applications)

• Ball Material: Ceramic (CG = Ceramic Grade)

• Bore Diameter: 40 mm

• Outer Diameter: 62 mm

• Width: 12 mm

• Cage Type: Polyamide / Phenolic Resin (depending on series)

• Construction: Single-row

• Lubrication: Grease or oil (depending on configuration)

• Speed Capability: Very high-speed operation suitable for spindle use

Applications:

• CNC machine tool spindles

• Precision machining centers

• Robotics and servo systems

• High-speed motors and turbines

• Automation equipment

Benefits:

• Ultra-high rotational accuracy (P4 class)

• High-speed capability with ceramic balls

• Low friction and reduced heat generation

• Long service life under heavy-duty use

• Stable and smooth operation

The post NTN 7908CG/GNP4 High Precision Angular Contact Ball Bearing appeared first on www.overwin.co.th.

The NMB 4715KL-05W-B39 is a 24VDC axial cooling fan designed for industrial, automation, and electronic cooling applications. With a 120mm x 120mm x 38mm frame, it provides high airflow and static pressure while maintaining low noise and long service life.

Manufactured by NMB Technologies (MinebeaMitsumi Group), this model features dual ball bearings that ensure stable performance and reliability even under continuous operation. The 4715KL series is known for its balance between airflow efficiency and noise control, making it a top choice for cooling power supplies, control cabinets, UPS systems, and automation drives.

Specifications:

• Brand: NMB Technologies

• Model: 4715KL-05W-B39

• Series: 4715KL Series

• Voltage: 24VDC

• Current: Approx. 0.18A

• Fan Size: 120 × 120 × 38 mm

• Bearing Type: Dual Ball Bearing

• Airflow: Approx. 100–120 CFM

• Speed: ~3000 RPM (typical)

• Noise Level: ~40 dBA (low noise operation)

• Frame Material: Aluminum

• Impeller Material: Plastic (UL94V-0 rated)

• Connector: Lead wires or terminal (depending on version)

• Direction: Axial (airflow parallel to fan axis)

• Operating Temperature: –10°C to +70°C

Applications:

• Control panels and automation systems

• Industrial equipment and power supplies

• Inverters and servo drives

• Communication cabinets and servers

• UPS and cooling modules

Benefits:

• Reliable continuous operation

• High airflow and static pressure

• Durable ball bearing design

• Low noise and vibration

• Trusted NMB performance

The post NMB 4715KL-05W-B39 24VDC Cooling Fan (120×120×38mm) appeared first on www.overwin.co.th.

The Allen-Bradley 1763-BA is a replacement lithium battery module designed for MicroLogix 1100 and 1400 programmable logic controllers (PLCs). It provides non-volatile memory backup, preserving user programs and data when main power is removed.

This high-quality, long-life battery ensures consistent performance and protection against data loss, making it an essential spare part for PLC maintenance. Compact and easy to replace, the 1763-BA offers years of reliable service in industrial environments.

Features:

• Brand: Allen-Bradley / Rockwell Automation

• Model: 1763-BA

• Type: Lithium Battery Module

• Chemistry: Lithium (non-rechargeable)

• Voltage: 3V nominal

• Provides memory backup for MicroLogix controllers

• Long service life (typically 5–10 years)

• Easy to install and replace

Compatible With:

• MicroLogix 1100 PLC

• MicroLogix 1400 PLC

Applications:

• PLC memory backup

• Industrial automation systems

• Process control and factory equipment

• Preventing program loss during power outages

Benefits:

• Protects PLC data and programs

• Reliable long-term battery life

• Maintenance-friendly replacement

• Designed and approved by Allen-Bradley

The post Allen-Bradley 1763-BA Lithium Battery appeared first on www.overwin.co.th.