YOKOGAWA CA51 Comprehensive Source/Measure Calibrator

Specifications:
space
Signal generating unit response time Approximately 1 sec. (Time between start of voltage change and when the voltage enters accuracy range)
Signal genertating unit voltage limiter Approximately 32 Volts
Signal genertating unit current limiter Approximately 25 mA
Divided output (m/n) function output= setting x (n/m) x n=0-m; m=1-9; n ≤ m
Auto-step output function n value sent automatically when n/m value selection is slected (two option: approximately 2.5 seconds/step or 5 seconds/step )
Sweep function Sweep time (two option: approximately 16 seconds or 32 seconds)
Memory function 50 value sets (generated and measured values are storedas value set with the same address (up to 50 value sets can be strored))
Measuring unit maximum input Voltage terminal: 300VAV AC Current terminal: 120 mADC
Current terminal input protection fuses 125 mA/250V
Measuring unit ground voltage 300 VAC maximum
Measurement display update rate Approximately once per second
Display Segmented LCD (approximately 76mm x 48 mm )
Backlight LDE Backlight; auto-off after 1 minute ( from when the light key is turned on)
Consumed power Approximately 7VA ( using 120Vac Adapter)
Auto-power off function Approximately 10 minutes
Applicable standards IEC6101-I; IEC6101-2-31 EM61326: 1997 +1A: 1988 EN55011: 1988, Class B, Group 1
Insulation resistance Across input and output terminal, 500 VDC, 50MΩ or greater
space
General Specifications:
space
Withstand Voltage : Across the input and output terminals, 3.7 kVAC for one minute
Operating Temp. -20-50 °C, 20-80% RH (no condenstation)
External dimensions : Approx, 190mm(W) X 120mm(H) X 155mm(D)
Weight : Approx, 730kg ( Batteries included)
Power supply
: AC adapter 100 to 240V
Accessories
: Signal generating leads cables (1-Red, 2-Black) Measurement Leads (1-Red, 1-Black ) Carrying Case Four AA alkaline batteries A1070EBX4