The AA121CK01 is a 12.1-inch TFT-LCD module designed for industrial display use. It integrates the LCD panel, driver circuits, and backlighting system, providing a complete display solution for integration into machine control panels and embedded systems.

Expected / Typical Features (confirm with datasheet):

• Panel size: 12.1 inches

• Resolution: e.g. XGA (1024 × 768) or SXGA (1280 × 1024)

• Interface: LVDS, TTL, or RGB

• Backlight: LED or CCFL

• Operating temperature: industrial range (e.g. –20 °C to +70 °C)

• Mechanical size: outer dimensions, mounting hole layout, panel thickness

• Brightness / contrast ratio, viewing angles

• Power requirements: logic voltage, backlight voltage/current

Applications:

• Industrial HMI (Human-Machine Interfaces)

• Control panels in automation equipment

• Embedded display solutions for machines

• Instrumentation & test systems

• Panel PCs or operator consoles

The post AA121CK01 12.1″ TFT-LCD Module | Industrial Display Panel appeared first on www.overwin.co.th.

The Mitsubishi AA104SH02 is a 10.4-inch a-Si TFT-LCD module composed of the LCD panel, driver ICs, control circuits, and LED backlighting system. Beyondinfinite.com+2file01.andesource.com+2

This module supports SVGA resolution (800 × 600 RGB) and uses an LVDS (Low Voltage Differential Signaling) interface for data. Mouser Electronics+1 Its operating temperature range is from about –30 °C to +80 °C. agdisplays.com+1

The backlight is LED based (white LED) and is typically driven by a built-in or companion LED driver circuit. store.lcdparts.net+2agdisplays.com+2

Mechanically, the module’s overall dimensions are approximately 230.0 mm × 180.2 mm × 10.5 mm with an active area of 211.2 mm × 158.4 mm. store.lcdparts.net+2elecok.com+2

Key Features & Benefits

• Clear SVGA resolution (800 × 600) with good color reproduction

• LVDS interface ensures good signal integrity over cable

• Industrial temperature tolerance (–30 to +80 °C)

• LED backlight for brightness and long life

• Solid mechanical design for HMI, instrumentation, control panels

Typical Applications

• Operator panels / HMIs in factory automation

• Industrial control consoles

• Embedded systems needing a color display

• Test & measurement devices

• Medical or instrumentation displays

The post Mitsubishi AA104SH02 10.4″ SVGA TFT LCD Module appeared first on www.overwin.co.th.

The Mitsubishi AA065VB01 is a 6.5-inch color TFT-LCD module that integrates an LCD panel, driver ICs, control circuitry, and backlight unit. Beyondinfinite.com+1

It supports a 640 × 480 (VGA) resolution with 262K colors (6-bit RGB). Beyondinfinite.com The module is typically powered by 3.3 V or 5.0 V logic for the LCD side. Beyondinfinite.com The backlight is provided by dual CCFL tubes (edge-lit) and requires its own inverter drive. Beyondinfinite.com

Mechanically, the module size is about 154.0 mm × 121.0 mm × 11.0 mm, with an active display area of 132.48 × 99.36 mm. Beyondinfinite.com

Key Features & Benefits

• TFT display with 262K colors, VGA resolution (640 × 480) Beyondinfinite.com

• CMOS / TTL digital interface for display data Beyondinfinite.com

• Good viewing angles (±70° horizontal, ±60° vertical typical) Beyondinfinite.com

• Anti-glare and hard coated front surface (3H) Beyondinfinite.com

• Backlight via dual CCFL lamps, ~50,000 h lifetime typical Beyondinfinite.com

• Compact and relatively thin module form factor

• Suitable for industrial control panels, HMI units, and embedded display applications

Typical Applications

• Industrial human-machine interface (HMI) equipment

• Control panels and operator consoles

• Embedded systems requiring color display

• Test & measurement instrumentation

• Factory automation display modules

The post Mitsubishi AA065VB01 6.5″ TFT-LCD Module (640×480 VGA) appeared first on www.overwin.co.th.

The Fanuc A90L-0001-0537/R is a dedicated spindle motor cooling fan designed for use in CNC machines and automation systems to maintain safe operating temperatures in spindle motors. It provides forced air cooling directly on rotating spindles or their housing, thereby improving reliability, reducing heat stress, and prolonging motor life.

Manufactured to OEM tolerances and compatible with Fanuc spindle assemblies, this fan is often specified to run on AC 200 V (3-phase) with a power rating around 30–32 W. CPU Medics It replaces or matches models such as A90L-0001-0537#RM2 in many spindle setups. avtechmachine.net

Features & Benefits

• OEM Fanuc spindle fan for reliable integration

• AC 200V, 3-phase operation

• ~30–32 W power rating CPU Medics

• Designed for continuous operation in harsh industrial environments

• Helps maintain safe spindle temperatures and prevents overheating

• Direct replacement for standard Fanuc spindle cooling fans

Typical Applications

• Cooling for CNC spindle motors

• Thermal management in machine tool spindles

• Retrofit or replacement fan for Fanuc spindle systems

• Use in precision machining centers where spindle overheating is a concern

The post Fanuc A90L-0001-0537/R Spindle Motor Cooling Fan appeared first on www.overwin.co.th.

The FANUC A66L-2050-0031 is an OEM ribbon/data cable used in FANUC CNC and automation systems. It enables data communication between control boards, interface cards, and modules. This cable is commonly used as a connecting line or ribbon cable in FANUC drives, controllers, HMIs, and interface boards. Eisen Machinery Inc+2Alibaba+2

Features & Benefits:

• Genuine or equivalent FANUC cable designed for compatibility

• Robust construction for industrial environments

• Flexible ribbon / flat cable format for compact routing

• Reliable signal integrity for control and data lines

• Long service life and high resistance to vibration

Typical Applications:

• Interconnecting boards in FANUC CNC systems

• Linking control modules and interface units

• Repair and replacement for FANUC controllers or I/O modules

• Automation panels requiring internal data wiring

The post FANUC A66L-2050-0031 Ribbon / Data Cable appeared first on www.overwin.co.th.

The 1.27.4AC2 MKP 5 µF 420–470 V capacitor is a metallized polypropylene film (MKP) AC start capacitor designed specifically for motor starting and surge applications in AC circuits. This non-polarized film capacitor delivers reliable performance and long life in demanding environments.

Key Features & Benefits

• Capacitance: 5 µF

• Rated AC Voltage: 420–470 V

• Construction: Metallized Polypropylene Film (MKP)

• Low loss, low dissipation factor, high insulation resistance

• Excellent pulse / surge handling performance

• Self-healing dielectric to extend operational life

• Suitable for intermittent or start duty in motor circuits

• Compact and robust build for industrial use

Typical Applications

• Motor start circuits (e.g. compressors, pumps, fans)

• HVAC and refrigeration systems

• AC drive start assist

• Automation and control panels

• General purpose power and surge capacitor use

Notes & Tips

• Confirm the allowed inrush current or surge rating with datasheet before heavy use

• Ensure proper voltage derating in hotter environments

• Use in circuits matching AC frequency and phase conditions

• Always respect safety ratings when replacing in control systems

The post Arcotronics 1.27.4AC2 MKP Start Capacitor 5 µF 420–470 V appeared first on www.overwin.co.th.

The 955565 3.7V lithium polymer battery is a rechargeable Li-Po cell designed for portable electronics, smart devices, and embedded systems. Offering high capacity (typically 3500–4500mAh) in a slim, lightweight form, this battery provides stable voltage output and long cycle life.

The model code 955565 represents the battery’s approximate dimensions — 9.5 mm thickness × 55 mm width × 65 mm length, making it ideal for compact product designs. It’s built with high-quality lithium polymer chemistry, featuring integrated protection circuitry (PCM) to prevent overcharge, over-discharge, and short-circuit damage.

Specifications:

• Model: 955565

• Nominal Voltage: 3.7 VDC

• Capacity: 4000 mAh (typical, varies by manufacturer 3500–4500 mAh)

• Battery Type: Lithium Polymer (Li-Po)

• Dimensions: 9.5 × 55 × 65 mm (approx.)

• Charging Voltage: 4.2 V (max)

• Discharge Cut-off: 3.0 V (recommended)

• Protection Circuit: Optional (PCM/BMS available)

• Connector: JST or customized leads (varies by model)

• Cycle Life: ≥ 500 charge/discharge cycles

• Operating Temperature: –20 °C ~ +60 °C

Applications:

• IoT and sensor modules

• Portable handheld devices

• Bluetooth speakers and audio systems

• GPS trackers and data loggers

• Smart home and wearable products

• Medical and test instruments

Benefits:

• High energy density in compact form

• Long cycle life and stable discharge curve

• Built-in safety protection (optional PCM)

• Lightweight design with flexible mounting options

• Ideal for low-to-medium power electronics

The post 955565 3.7V 4000mAh Lithium Polymer Battery appeared first on www.overwin.co.th.

The 13168Z/98 2000W quartz infrared halogen lamp is a reflector-type IR heater lamp ideal for industrial processes requiring precise, high-intensity heat. With a tungsten filament enclosed in a quartz tube and a white reflector backing, this lamp provides efficient directional infrared emission.

Typical specifications include:

• Power: 2000 W

• Operating Voltage: ~ 235 V (or variant)

• Bulb Type: T3 quartz tube with white reflector

• Base / Connection: SK15 with lead wires / fork terminals

• Overall Length (MOL): ~ 353 mm (or ~ 14″)

• Rated Life: ~ 5000 hours typical

• Emission: Short-wave / medium-wave IR radiation for fast heating response

Applications:

• Plastic blow molding and PET bottle heating

• Drying and curing of coatings, inks, adhesives

• Infrared heating in tunnel ovens

• Preheating, forming, laminating in industrial processes

Benefits:

• Rapid, targeted heating with low thermal lag

• Durable quartz construction for high-temperature environments

• Reflector design enhances directional heat output

• Long life and stable performance under continuous use

The post 13168Z/98 2000W Quartz Infrared Halogen Heating Lamp appeared first on www.overwin.co.th.

The NTN 7908CG/GNP4 is a single-row angular contact ball bearing from NTN’s Precision Bearing (GNP4) Series, specifically designed for high-speed and high-accuracy applications such as CNC spindles, robotics, and precision machinery.

Built with ceramic balls (CG type) and super-finished steel rings, this bearing provides exceptional rotational accuracy, low heat generation, and extended service life even under demanding speed and load conditions. The GNP4 precision rating (ABEC-7 equivalent) ensures tight dimensional tolerances and smooth operation, essential for machine tool performance.

Specifications:

• Brand: NTN

• Model: 7908CG/GNP4

• Type: Angular Contact Ball Bearing

• Precision Class: GNP4 (ISO Class P4 / ABEC-7)

• Contact Angle: 15° (typical for high-speed applications)

• Ball Material: Ceramic (CG = Ceramic Grade)

• Bore Diameter: 40 mm

• Outer Diameter: 62 mm

• Width: 12 mm

• Cage Type: Polyamide / Phenolic Resin (depending on series)

• Construction: Single-row

• Lubrication: Grease or oil (depending on configuration)

• Speed Capability: Very high-speed operation suitable for spindle use

Applications:

• CNC machine tool spindles

• Precision machining centers

• Robotics and servo systems

• High-speed motors and turbines

• Automation equipment

Benefits:

• Ultra-high rotational accuracy (P4 class)

• High-speed capability with ceramic balls

• Low friction and reduced heat generation

• Long service life under heavy-duty use

• Stable and smooth operation

The post NTN 7908CG/GNP4 High Precision Angular Contact Ball Bearing appeared first on www.overwin.co.th.

The Burkert 6281EV A25.0 NBR is a direct-acting solenoid valve from the Burkert Type 6281 Series, designed for on/off control of liquids and gases. Known for its robust build, high reliability, and long service life, this valve is widely used in water treatment, air systems, and general automation applications.

Equipped with an NBR (nitrile rubber) seal, it is suitable for neutral fluids such as air, water, and hydraulic oils. The A25.0 designation refers to a 25mm (1”) orifice, offering high flow capacity with quick actuation.

Manufactured by Burkert Fluid Control Systems, a global leader in process and control technology, this valve ensures precise switching performance and consistent flow characteristics, even under demanding operating conditions.

Specifications:

• Brand: Burkert

• Model: 6281EV A25.0 NBR

• Series: Type 6281EV

• Valve Type: 2/2-way solenoid valve (normally closed or normally open, depending on coil)

• Orifice Size: 25 mm

• Seal Material: NBR (Nitrile Rubber)

• Body Material: Brass (standard)

• Medium: Air, water, hydraulic oil, neutral liquids and gases

• Pressure Range: Typically up to 10 bar (depending on coil and media)

• Temperature Range: –10°C to +80°C (media-dependent)

• Connection Type: G1” (or equivalent thread)

• Operation: Servo-assisted piston type

Applications:

• Water and fluid control systems

• Compressed air and pneumatic automation

• HVAC systems and cooling circuits

• Machine tools and industrial processes

• General-purpose fluid control

Benefits:

• Reliable and long-lasting performance

• NBR seal for neutral media compatibility

• Fast switching and high flow rate

• Compact and easy to install

• Backed by Burkert quality and precision

The post Burkert 6281EV A25.0 NBR Solenoid Valve appeared first on www.overwin.co.th.